What is a standoff?
A standoff is a piece of hardware that is used to mount
you substrate or material away from the wall. It usually
includes a cap, stud, washers, and a barrel.
What tools are required for install?
To install most of our products you would need a drill,
drill bit, and screw driver. It would be recommended
that a level is utilized to ensure proper and level
mounting.
What hardware will I need to purchase in order to use
the art hanging systems?
The hardware needed to use the art hanging systems
includes the rail, the hanging cables, cable hooks, and
the mounting hardware for the rails.
What is the difference between the classic rail and the
ceiling rail?
The classic rail is designed to be mounted to the wall
and the ceiling rail is designed to be mounted to the
ceiling at the corner where the wall meets.
What length do the rails and tracks come in?
All of our rails and tracks come in 72” or 6ft length.
How long does install usually take?
The amount of time required to install your project
determines on how handy the installer is and how
extensive the project is. It can take anywhere from 10
minutes and above to install.
Is installation difficult?
All installations are pretty simple and straightforward.
It usually just involves marking your mounting surface,
drilling the holes for the mounting hardware and
mounting the signage and/or art. If there is additional
information or instructions a Sales Representative can
assist you by phone at 813-938-6025 or by email at
sales@mbs-standoffs.com.
We also have installation videos and guides available on
our website.
Can you use the cable and rod systems outside?
The cable and rod systems are best used indoors. We do
not recommend that they be used outside.
How much weight can a standoff hold?
Each standoff is rated for 18lbs per and that is not
including how it is being mounted. If the product is
mounted properly there will be a greater supported
weight. Please refer to the data sheets provided with
the anchors for drywall and concrete.
How much weight can be supported by the stainless steel
cable?
The 1/16” stainless
steel cable can support up to 50 lbs. not including the
mounting hardware. The 1/8” cable can support up to 100
lbs. per cable not including the mounting hardware.
What is the cap?
A cap is the piece that finishes the overall look of the
application. It is the part that holds the material to
the barrel. It is also known as the puck or head.
What is the barrel?
A barrel is the base of the standoff that is what holds
the material away from the wall.
What is a Stud?
The bolt that holds the cap and barrel together through
hole in your substrate or material.
Where should I drill my hole on my substrate?
This is completely up to you and the customer but it is
recommended that usually the hole sits 1” – 2” away from
the edge of the material.
How many standoffs are suggested for my sign?
The amount of standoff usually is based on the size of
the sign itself. We normally recommend a standoff every
2’ or 24”. A good example would be a 4’ x 8’ sign the
recommended amount if standoffs would be 4 across the
top and 4 across the bottom so a total of 8 standoffs.
Can you cut the rods, rails, tracks, and z-clips?
Yes, it is recommended that you contact your local
hardware store for the correct tools to cut the aluminum
and stainless steel with.
Does the flag sign come without the glass?
The flag sign is sold as a set and cannot be sold
separately.
Is there a performance difference between the stainless
steel and aluminum?
The only difference between aluminum and stainless steel
is the finish.
What grade of stainless steel do you use in your
product?
Our stainless steel products is made form 3 different
grades of stainless steel. Grade 201 is for indoor use
only, Grade 304 is for indoor and outdoor use, and we
also have 316 Marine Grade stainless steel.
Can I paint the standoffs?
Mbs Standoffs does not recommend painting the standoffs
since they are already processed for their finish at our
production facility. We have had customer who have
painted out products with a third party but there will
be no returns accepted if it doesn’t work.